More information about C.S. Osborne 1201/2
C.S. Osborne 124 Staple Remover 124 Upholstery Tools
Quality made in New Jersey, USA.
More information about Osborne 124
Similar products
Staple Puller Plier for Upholstery / MADE IN USA - C.S. OSBORNE No. 600
Quality made in New Jersey, USA. The nose of these pliers is bent at the right angle to go under the staple, grab it, and pull it out. Vinyl handles add comfort. Forged Steel.
More information about CS Osbourne 600
Similar products
Crain 126 Staple Remover
The nose of these pliers is bent at the right angle to go under the staple, grab it, and pull it out. Vinyl handles add comfort. Forged Steel. Removes staples quickly and easily. The pinching action of this tool clamps the crown of the staple as the lever pulls it from the floor.
More information about Crain 126
Similar products
Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler
Vinyl handles add comfort. Forged Steel. Removes staples quickly and easily. It uses standard senco c type 22-gauge, 3/8-inch crown staples to get the job done right, and it includes a 1-inch nose extension for those tough to reach areas. Steel top cap for durability. Rear exhaust port channels air and tool oil/condensation away from user; Driver guide moves back with magazine, allowing jams to be easily cleared when magazine is open.
Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler - The us58 stapler requires 70-120 PSI air pressure, so it will work with most air compressors. The high-capacity bottom-load magazine handles 185 staples, and the driver guide moves back to easily clear jams from the magazine. 1-inch nose extension for limited clearance fastening. Lever pulls staple from floor.
3/8-inch crown staples from 1/4-inch to 5/8-inch long.
More information about PORTER-CABLE US58
Similar products
Narex 879300 Upholstery Staple Remover with Beech Wood Handle Hardened Blade
Overall length is 8". Steel top cap for durability. Has a 5/16" 8 mm diameter blade that extends all the way through the handle. 3/8-inch crown staples from 1/4-inch to 5/8-inch long. 1-inch nose extension for limited clearance fastening. Tool clamps crown of the sample. Lever pulls staple from floor. Handle has a metal ferrule to withstand torque.
Narex 879300 Upholstery Staple Remover with Beech Wood Handle Hardened Blade - This staple remover is made by a small tool manufacturer in the Czech Republic and is of exceptional quality. Forged from Alloy tempered steel. This remover has the correct angle for removing staples of any size, from the smallest to the long leg staples and shredded materials. Quality made in New Jersey, USA.
The nose of these pliers is bent at the right angle to go under the staple, grab it, and pull it out.
More information about Narex
Similar products
Surebonder 9600AK Pneumatic Heavy Duty Standard T-50 Type Stapler Kit, 1/4-Inch - 9/16-Inch, 7-Piece
B&C Eagle 71/10 3/8-Inch Length x 3/8-Inch Crown x 22 Gauge Galvanized Fine Wire Staples 10,000 per box
Use b&c eagle fasteners for more positive drives, fewer jams and lasting quality. For the best corrosion protection available, always use Stainless Steel fasteners. We use only high quality collation materials and glues to keep the fasteners together before and during use. Please consult your tool owner's manual for size ranges.
B&C Eagle 71/10 3/8-Inch Length x 3/8-Inch Crown x 22 Gauge Galvanized Fine Wire Staples 10,000 per box - Has a 5/16" 8 mm diameter blade that extends all the way through the handle. If your tool model number is listed below and our fastener fits within the size range of your tool, our fastener will work, guaranteed. The blade if made from carbon steel which is hardened and tempered. Please make sure you select the right coating for your application.
Made by a small tool manufacturer in the Czech Republic. Overall length is 8". Pack of 22 gauge, 3/8-inch galvanized staples.
More information about B & C Eagle 71/10
Similar products
MROCO 126 Staple Remover Heavy Duty Staple Remover, Staple Puller Tool 200 Sheets Strength Staple Puller Removing All Kinds of Staples for Furniture, Floor, Wooden Case, Carton, Photo Frame, Carpet
Steel top cap for durability. Ideal for furniture, wooden case, floor, carton, photo frame, carpet. Saves time and will not damage the surface. Lever pulls staple from floor. Tool clamps crown of the sample. Rear exhaust port channels air and tool oil/condensation away from user; Driver guide moves back with magazine, allowing jams to be easily cleared when magazine is open.
MROCO 126 Staple Remover Heavy Duty Staple Remover, Staple Puller Tool 200 Sheets Strength Staple Puller Removing All Kinds of Staples for Furniture, Floor, Wooden Case, Carton, Photo Frame, Carpet - And more what you are looking for. Uses standard senco type, 22 ga. Overall length is 8". Pack of 22 gauge, 3/8-inch galvanized staples. Stapler remover stick removes all kinds of staples easily and quickly, saves time, works for up 20 to 200 sheets. Leverage design reduces the amount of strength needed, super lightweight and non-slip design for comfortable use.
More information about MROCO.LLC
Similar products
AIR LOCKER A01 Upholstery and Construction Heavy-Duty Staple Remover
Packaged in box of 10, 000 Stainless steel lifting mechanism for easily lifting, gripping and removing staples. Galvanized for greater durability. This staple remover can help you quickly remove deeply embedded staples in your furniture, drywall, insulation bearing studs, or virtually where-ever else you find them, helping you skip straight to the constructive aspects of your project.
AIR LOCKER A01 Upholstery and Construction Heavy-Duty Staple Remover - Comfortable non-slip, easy grip handle | Lever pulls staple from floor. Tool clamps crown of the sample. Made by a small tool manufacturer in the Czech Republic. Just insert the probe under staple and use the rocker mechanism to remove. Steel top cap for durability. Ideal for heavy duty jobs, and removing deeply engrained staples, this ergonomic design is used as a lever which reduces the amount of strength needed.
3/8-inch crown staples from 1/4-inch to 5/8-inch long.
More information about AIR LOCKER A01
Similar products
C.S.Osborne &Co. No. 763 Staple Lifter 2 1/4" Blade, Red Handle
4 ounces. 6 1/2 inch Overall Length. 763 staple Lifter Forged steel. 1-inch nose extension for limited clearance fastening. The blade if made from carbon steel which is hardened and tempered. Large foot -print minimizes the risk of surface damage. 2 1/4 inch Blade. 6 1/2 inch overall Length. Mpn #64784, to last. Packaged in box of 10, 000
C.S.Osborne &Co. No. 763 Staple Lifter 2 1/4" Blade, Red Handle - Comfortable non-slip, easy grip handle | Lever pulls staple from floor. Ergonomically design with leverage feature for comfortable use | Tool clamps crown of the sample. Nickel plated. C.
More information about C. S. Osborne & Co.
Similar products
B&C Eagle 71/12 1/2-Inch Length x 3/8-Inch Crown x 22 Gauge Galvanized Fine Wire Staples 10,000 per box
Will not mar material, because no hammer is needed | Removes staples quickly and easily. Stainless steel lifting mechanism for easily lifting, gripping and removing staples. Just insert the probe under staple and use the rocker mechanism to remove. Rear exhaust port channels air and tool oil/condensation away from user; Driver guide moves back with magazine, allowing jams to be easily cleared when magazine is open.
B&C Eagle 71/12 1/2-Inch Length x 3/8-Inch Crown x 22 Gauge Galvanized Fine Wire Staples 10,000 per box - The blade if made from carbon steel which is hardened and tempered. 763 staple Lifter. C. S. Osborne &co. Chisel Point.
More information about B & C Eagle 71/12
Similar products
