#ad
#ad
Robert Larson Co 800-2875 #ad - Place on your wood stock to quickly find the center. Round stock capacity 8". Handy for all woodworkers. A simple yet effective tool. Square capacity 8". Octagon stock capacity 8". Hexagon stock capacity 5 3/4".

More information about Robert Larson Co 800-2875 #ad

Big Horn 19053C 3 Pieces 8-Inch Spring Caliper / Divider Set

#ad
#ad
Big Horn 19053 #ad - Precision ground with threaded spool mechanism for infinite adjustment. Stainless steel with hardened fulcrum spring and points for long life. Big horn inside calipers are great for gauging the inner diameter of an opening and then transferring that measurement to a ruler. Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this caliper set.

Big horn flat leg dividers is a useful measurement transfer tool for uneven surfaces; Also great for a variety of uses such as tracing contours and scribing circles into metal. The forged steel legs feature hardened points for precise marking of the work piece | An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment.

Big Horn 19053C 3 Pieces 8-Inch Spring Caliper / Divider Set #ad - Includes 8-inch outside caliper, 8-Inch Inside Caliper, and 8-Inch Divider. Big horn outside calipers is a useful measurement transfer tool when working with round stock or oddly shaped materials and then transferring that measurement to a ruler.

More information about Big Horn 19053 #ad


Similar products



PSI Woodworking Products TM32 1/2-Inch Diameter Drill Chuck with a 2 MT Mount

#ad
#ad
PSI Woodworking TM32 #ad - Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this caliper set. Big horn outside calipers is a useful measurement transfer tool when working with round stock or oddly shaped materials and then transferring that measurement to a ruler. Removed easily with a knock-out bar.

Drill chuck mounted in the #2 MT can be used in either the headstock or tailstock. Big horn flat leg dividers is a useful measurement transfer tool for uneven surfaces; Also great for a variety of uses such as tracing contours and scribing circles into metal. Tightens with a chuck key for excellent grip. Removed easily with a knock-out bar.

PSI Woodworking Products TM32 1/2-Inch Diameter Drill Chuck with a 2 MT Mount #ad - Can be used in either the headstock or tailstock. Big horn inside calipers are great for gauging the inner diameter of an opening and then transferring that measurement to a ruler. Tightens with a chuck keyincluded for excellent grip. Will hold drill bits up to 1/2-Inch in diameter. Will hold drill bits up to 1/2-Inch in diameter.

2 morse taper mount for delta, Jet, PSI, and other Midi lathe headstocks and tailstocks. Accepts a 1/4-20" draw bolt not supplied for safety.

More information about PSI Woodworking TM32 #ad


Similar products



Wolverine Grinding System with VARI-GRIND jig

#ad
#ad
Oneway 7738 #ad - Uniform cutting edges and single facet bevels will give you safer, more predictable tools. Oneway has spent a considerable amount of time and effort to develop a system which will consistently produce sharp, repeatable geometries on turning tools for the woodturner. Bases are equipped with cam-lock clamping that makes the removal and installation of all attachments possible in 10 seconds or less.

This platform can be used on both the left and right hand sides of the grinder. Will hold drill bits up to 1/2-Inch in diameter. These shapes however are difficult both to grind and maintain. Can be used in either the headstock or tailstock. The forged steel legs feature hardened points for precise marking of the work piece | An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment.

Wolverine Grinding System with VARI-GRIND jig #ad - Big horn flat leg dividers is a useful measurement transfer tool for uneven surfaces; Also great for a variety of uses such as tracing contours and scribing circles into metal. Tightens with a chuck key for excellent grip. Big horn inside calipers are great for gauging the inner diameter of an opening and then transferring that measurement to a ruler.

Drill chuck mounts in the 2 MT. The grinding jig comes with two bases - grinders come with two wheels, so we include two bases. This single attachment will produce every shape from the first mentioned fingernail grind right up to the side grind and everything in between to suit your needs.

More information about Oneway 7738 #ad


Similar products



Woodturner ins Multi-Roll Sanding Pack

#ad
#ad
Rockler #ad - Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this caliper set. Grinder and Turning Tools NOT included. Perfect for pen finishing! Various grits let you sand in succession for a smooth-as-silk finish. Removed easily with a knock-out bar. Includes: the wolverine sharpening System & The VARI-GRIND jig and setup blocks!

Can be used in either the headstock or tailstock. Produce razor sharp tools and finely finished bevels. Drill chuck mounts in the 2 MT. Big horn flat leg dividers is a useful measurement transfer tool for uneven surfaces; Also great for a variety of uses such as tracing contours and scribing circles into metal.

Woodturner ins Multi-Roll Sanding Pack #ad - Includes sandpaper in 150, 240, 320, 400 and 600 grits. The wolverine system was designed to replace conventional light duty toolrests with heavy duty universal grinding and dressing jigs for low cost grinders. Comes with 2 set up blocks for setting the VARI-GRIND Jig witch saves time, frustration and money.

The forged steel legs feature hardened points for precise marking of the work piece | An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment. Will hold drill bits up to 1/2-Inch in diameter. Includes five rolls of J-weight, cloth-backed sandpaper.

More information about Rockler #ad


Similar products



PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece

#ad
#ad
PSI Woodworking LCHSS8 #ad - Big horn inside calipers are great for gauging the inner diameter of an opening and then transferring that measurement to a ruler. It is the ideal kit for turning small pens, spindles, bowls and larger projects. Includes: the wolverine sharpening System & The VARI-GRIND jig and setup blocks! Grinder and Turning Tools NOT included.

. Set includes 8 essential chisels: 3/16-inch parting tool, 5/8-inch spear scraper, 1/2-Inch bowl gouge, 3/4-Inch spindle gouge, 5/8-Inch skew chisel, 5/8-Inch round nose scraper, 1-Inch skew chisel, 7/8-Inch roughing gouge. Comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box.

Produce razor sharp tools and finely finished bevels. The wolverine system was designed to replace conventional light duty toolrests with heavy duty universal grinding and dressing jigs for low cost grinders. Comes with 2 set up blocks for setting the VARI-GRIND Jig witch saves time, frustration and money.

PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece #ad - Removed easily with a knock-out bar. The set includes 8 essential chisels: 3/16-inch parting tool, 3/4-inch spindle gouge, 5/8-inch Spear Scraper, 5/8-Inch Round nose scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 1/2-Inch Bowl Gouge, 7/8-Inch Roughing Gouge. The forged steel legs feature hardened points for precise marking of the work piece | An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment.

We have assembled this 8-piece set to satisfy the majority of your turning needs.

More information about PSI Woodworking LCHSS8 #ad


Similar products



10" Round Center Finder/Finding Compass Clear Acrylic for Layout, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock

#ad
#ad
Peachtree Woodworking Supply Inc. 7381 #ad - Includes five rolls of J-weight, cloth-backed sandpaper. Super value for all turners. Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this caliper set. All you need to do is tap a small nail through the center hole, trays and platters in no time! The Clear Acrylic 10" Layout & Centering Finding Compass is great for laying out bowl, then pivot around the center point to make your circle mark.

Made. Also use for standard circles up to 10". Made from clear acrylic and marked for easy index identification. Will hold drill bits up to 1/2-Inch in diameter. Lay out bowls, insert a pencil in your choice of diameter hole marks circles from 1", increments, in 1/2", trays, to 10", platters and more. Makes circles from 1" to 10" in 1/2" increments.

10" Round Center Finder/Finding Compass Clear Acrylic for Layout, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock #ad - Includes: the wolverine sharpening System & The VARI-GRIND jig and setup blocks! Insert pencil in your choice of diameter hole. Grinder and Turning Tools NOT included. Drill chuck mounts in the 2 MT. Set includes 8 essential chisels: 3/16-inch parting tool, 5/8-inch skew chisel, 3/4-Inch spindle gouge, 1/2-Inch bowl gouge, 1-Inch skew chisel, 5/8-Inch round nose scraper, 5/8-inch spear scraper, 7/8-Inch roughing gouge.

Comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box.

More information about Peachtree Woodworking Supply Inc. 7381 #ad


Similar products



NOVA 48111 1-Inch 8TPI Direct Thread Precision Midi Wood Turning Chuck

#ad
#ad
NOVA 48111 #ad - The wolverine system was designed to replace conventional light duty toolrests with heavy duty universal grinding and dressing jigs for low cost grinders. Comes with 2 set up blocks for setting the VARI-GRIND Jig witch saves time, frustration and money. Direct threaded 1-Inch 8TPI RH. Big horn inside calipers are great for gauging the inner diameter of an opening and then transferring that measurement to a ruler.

The m2 high speed steel 5-1/4-inch blades outlast high carbon steel 6-to-1 and will give you years of use. Woodworm Screw for fast mounting of rough timbers. Auto stop so jaws don't protrude past chuck body. Set includes 8 essential chisels: 3/16-inch parting tool, 3/4-inch spindle gouge, 1-Inch skew chisel, 5/8-inch spear scraper, 5/8-Inch round nose scraper, 1/2-Inch bowl gouge, 5/8-Inch skew chisel, 7/8-Inch roughing gouge.

Comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box. All you need to do is tap a small nail through the center hole, trays and platters in no time! The Clear Acrylic 10" Layout & Centering Finding Compass is great for laying out bowl, then pivot around the center point to make your circle mark.

NOVA 48111 1-Inch 8TPI Direct Thread Precision Midi Wood Turning Chuck #ad - Nova 48111 precision midi wood turning chuck 1-inch 8tpi direct thread is a smaller 4 Jaw self centering chuck that minimizes loads on small lathe spindles and bearings, suitable for smaller Wood lathes with up to 12-Inch swing. Tap a small nail through center hole. With unique nova features such as auto stop, Copper composite Jaw Slides, Woodworm Screw and 2-Inch Jaws as standard, this chuck is fully featured.

More information about NOVA 48111 #ad


Similar products



PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

#ad
#ad
PSI Woodworking CUG3418CC #ad - Heavy duty chrome-plated self-centering chuck will hold your work tight and secure on midi and full size woodworking lathes. This c series chuck works with all "C" series jaws. Includes sandpaper in 150, 320, 240, 400 and 600 grits. Ideal kit for turning small pens, spindles, bowls and larger projects. Makes circles from 1" to 10" in 1/2" increments.

Fits full range of NOVA Chuck Accessories. It can also be used for laying out standard circles up to 10" for many different types of projects. Includes screw chuck. The forged steel legs feature hardened points for precise marking of the work piece | An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment.

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System #ad - The wolverine system was designed to replace conventional light duty toolrests with heavy duty universal grinding and dressing jigs for low cost grinders. Comes with 2 set up blocks for setting the VARI-GRIND Jig witch saves time, frustration and money. Also includes an Allen Wrench and a set of Tightening Levers.

Auto stop so jaws don't protrude past chuck body. Super value for all turners. Can be used in either the headstock or tailstock. Made.

More information about PSI Woodworking CUG3418CC #ad


Similar products



NOVA 48232 G3 Reversible Wood Turning Chuck Dedicated to fit 1" x 8tpi lathe spindles only

#ad
#ad
Teknatool International 48232 #ad - Dedicated to fit 1" x 8tpi lathe spindles. Woodworm Screw for fast mounting of rough timbers. Auto stop so jaws don't protrude past chuck body. This c series chuck works with all "C" series jaws. It comes with a reverse lock feature that enables the chuck to be locked securely onto the lathe spindle when using the forward and reverse functions on the NOVA 46000 Comet II Lathe.

All you need to do is tap a small nail through the center hole, trays and platters in no time! The Clear Acrylic 10" Layout & Centering Finding Compass is great for laying out bowl, then pivot around the center point to make your circle mark. Accepts full range of NOVA Chuck Accessories. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955.

NOVA 48232 G3 Reversible Wood Turning Chuck Dedicated to fit 1" x 8tpi lathe spindles only #ad - Super value for all turners. Chuck is pre-threaded to 1" x 8tpi. Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal. Lay out bowls, to 10", insert a pencil in your choice of diameter hole marks circles from 1", increments, in 1/2", trays, platters and more. The m2 high speed steel 5-1/4-inch blades outlast high carbon steel 6-to-1 and will give you years of use.

Includes five rolls of J-weight, cloth-backed sandpaper. Set includes 8 essential chisels: 3/16-inch parting tool, 5/8-inch round nose scraper, 3/4-Inch spindle gouge, 5/8-Inch skew chisel, 1-Inch skew chisel, 1/2-Inch bowl gouge, 5/8-inch spear scraper, 7/8-Inch roughing gouge.

More information about Teknatool International 48232 #ad


Similar products



18 Pieces - Micro-Mesh 2" Assortment Pack

#ad
#ad
Micro-Surface P310 #ad - Big horn inside calipers are great for gauging the inner diameter of an opening and then transferring that measurement to a ruler. Woodworm Screw for fast mounting of rough timbers. This c series chuck works with all "C" series jaws. Super value for all turners. Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes.

Will hold drill bits up to 1/2-Inch in diameter. Tap a small nail through center hole. Big horn flat leg dividers is a useful measurement transfer tool for uneven surfaces; Also great for a variety of uses such as tracing contours and scribing circles into metal. All you need to do is tap a small nail through the center hole, trays and platters in no time! The Clear Acrylic 10" Layout & Centering Finding Compass is great for laying out bowl, then pivot around the center point to make your circle mark.

18 Pieces - Micro-Mesh 2" Assortment Pack #ad - Anti-release spindle lock, ensures chuck will stay securely mounted on the NOVA 46000 Comet II Midi Lathe during forward and reverse turning. Ranging from 1500 to 12, 000 grit. Assortment pack contain 2 each:soft touch micro mesh pad 1500 grit soft touch micro mesh pad 1800 gritsoft touch micro mesh pad 2400 gritsoft touch micro mesh pad 3200 gritsoft touch Micro Mesh Pad 3600 grit Soft Touch Micro Mesh Pad 4000 gritSoft Touch Micro Mesh Pad 6000 grit Soft Touch Micro Mesh Pad 8000 grit Soft Touch Micro Mesh Pad 12000 grit Big horn outside calipers is a useful measurement transfer tool when working with round stock or oddly shaped materials and then transferring that measurement to a ruler.

The m2 high speed steel 5-1/4-inch blades outlast high carbon steel 6-to-1 and will give you years of use. Fits full range of NOVA Chuck Accessories.

More information about Micro-Surface P310 #ad


Similar products